Performance Chip Tuning Ford Explorer
Up to 30% more power for your Ford Explorer
The Ford Explorer (2000 → 2019): 3 generations and 10 engines in our catalog. For 2 turbo engines, go with the GAN GT or GAN GTL tuner: the GAN GT adds +47 to +63 hp (GAN GT from 399 EUR, GAN GTL from 249 EUR). For 8 naturally aspirated engines, go with the GAN GA or GAN GA+: the GAN GA+ adds +23 to +30 hp (GAN GA+ from 199 EUR).
Which Ford Explorer do you have?
Start with the model year and generation. Then pick your engine by displacement and horsepower – you’ll find both in your owner’s manual or vehicle documents.
Ford Explorer tuner: what GAN does and doesn’t do
More power and torque, with no ECU flash and no new parts. The module only adjusts the engine sensor signals.
- Bluetoothswitch modes from your phone
- 18 mapsto fine-tune your engine

- 15 minutesplug-and-play install
- IP67water and dust protection
- +63 hpwith the GAN GT on turbocharged engines
+47 to +63 hp across the Ford Explorer lineup with the GAN GT or GAN GTL.
- +30 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Ford Explorer engines pick up +23 to +30 hp.
- GAN APPpower control via smartphone
Switch between SPORT, DYNAMIC, ECO and STOCK in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding shipping costs.
Ford Explorer tune: engines and generations
Ford Explorer tuner: pick your row by engine and hp
The Explorer is a U.S. regular, but this catalog's generation labels don't follow the U.S. count, so choose your row by engine and hp rather than by generation number. In the fifth-generation rows (U502) two 3.5 V6 engines sit side by side: the naturally aspirated 3.5 Ti-VCT at 294 hp takes the GAN GA+, and the twin-turbo 3.5 EcoBoost at 370 hp takes the GAN GT. The U.S. 2016 to 2019 2.3 EcoBoost four-cylinder is rated at 280 hp, and the Explorer (V) 2.3T row, listed at 276 hp, is the catalog's row for this engine.
Before you add a performance chip to a 2011 to 2019 Explorer with the naturally aspirated 3.5 V6, have the timing-chain-driven water pump checked, because a leak can put coolant in the engine oil. For towing and acceleration, line up the naturally aspirated 3.5, the 2.3 EcoBoost and the 3.5 EcoBoost side by side before you choose a module.
Ford Explorer tuning FAQ
Does the GAN performance chip work on the Ford Explorer?
Yes, but how much power you gain depends on the engine – each version has its own calibration. The generation table lists stock output, output with GAN and the gain.
Explorer 3.5 EcoBoost tune: which GAN module fits each 3.5 V6?
The GAN GA+ goes on the 3.5 Ti-VCT, rated at up to 12% more power, and the GAN GT goes on the 3.5 EcoBoost, rated at up to 30%. On the GAN GT, the 370 hp 3.5 EcoBoost reaches 433 hp. Those are catalog figures for the engine type, not a dyno reading of your Explorer.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU flash tune without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.