Performance Chip Tuning Genesis G90
Up to 30% more power for your Genesis G90
The Genesis G90 (2016 →): 2 generations and 5 engines in our catalog. For 1 turbo engine, go with the GAN GT or GAN GTL tuner: the GAN GT adds +63 to +63 hp (GAN GT from 459 EUR, GAN GTL from 279 EUR). For 4 naturally aspirated engines, go with the GAN GA or GAN GA+: the GAN GA+ adds +25 to +34 hp (GAN GA+ from 219 EUR).
Which Genesis G90 do you have?
Start with the model year and generation. Then pick your engine by displacement and horsepower – you’ll find both in your owner’s manual or vehicle documents.
Genesis G90 tuner: what GAN does and doesn’t do
More power and torque, with no ECU flash and no new parts. The module only adjusts the engine sensor signals.
- Bluetoothswitch modes from your phone
- 18 mapsto fine-tune your engine

- 15 minutesplug-and-play install
- IP67water and dust protection
- +63 hpwith the GAN GT on turbocharged engines
+63 to +63 hp across the Genesis G90 lineup with the GAN GT or GAN GTL.
- +34 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Genesis G90 engines pick up +25 to +34 hp.
- GAN APPpower control via smartphone
Switch between SPORT, DYNAMIC, ECO and STOCK in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding shipping costs.
Genesis G90 tuning FAQ
Does the GAN performance chip work on the Genesis G90?
Yes, but how much power you gain depends on the engine – each version has its own calibration. The generation table lists stock output, output with GAN and the gain.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU flash tune without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.