Performance Chip Tuning KIA Cerato I (2004–2009)
6 engines · +13 to +35 hp
Kia Cerato I: 6 engines — 3 gas and 3 diesel. Gains run from +13 to +35 hp, with up to +76 Nm more torque. GAN GTL from 219 EUR, GAN GT from 329 EUR. GAN GA+ from 189 EUR.
All Kia Cerato I engines: exact gains
STOCK output, output with GAN, gain and price for each module. Diesel and gasoline engines are listed separately.
| Engine | STOCK → with GAN | Gain | Tuners and prices | |
|---|---|---|---|---|
| Diesel · 3 engines | ||||
| 1.6 CRDi116 hp / 255 Nm | +35 hp+76 Nm |
GTL — 219 EUR · 146 hp GT — 329 EUR · 151 hp |
Select → | |
| 2.0 CRDi113 hp / 245 Nm | +34 hp+76 Nm |
GTL — 219 EUR · 142 hp GT — 329 EUR · 147 hp |
Select → | |
| 1.5 CRDi102 hp / 235 Nm | +31 hp+71 Nm |
GTL — 219 EUR · 128 hp GT — 329 EUR · 133 hp |
Select → | |
| Gasoline · 3 engines | ||||
| 2.0i143 hp / 186 Nm | +17 hp+22 Nm |
GA — 189 EUR · 160 hp GA+ — 189 EUR · 160 hp |
Select → | |
| 1.6i122 hp / 157 Nm | +15 hp+19 Nm |
GA — 189 EUR · 137 hp GA+ — 189 EUR · 137 hp |
Select → | |
| 1.6i105 hp / 143 Nm | +13 hp+17 Nm |
GA — 189 EUR · 118 hp GA+ — 189 EUR · 118 hp |
Select → | |
Each engine gets its own performance chip: GAN GT / GTL or GAN GA / GA+. Prices are per performance chip and include the current discount.
Not sure which engine you have?
The badge alone isn’t enough: in this generation, the same engine came with different horsepower ratings, each with its own calibration. Check the horsepower in your owner’s manual or vehicle documents and find the matching row.
Same badge, different factory power outputs in this generation:
Kia Cerato I tune: what changes
The module plugs in between the sensors and the engine control unit (ECU) and adjusts their signals. It never rewrites your ECU software: your factory warranty is preserved, and the module can be removed at any time.
- Bluetoothswitch modes from your phone
- 18 mapsto fine-tune your engine
- 15 minutesplug-and-play install
- IP67water and dust protection
- +35 hpbest in this generation
1.6 CRDi 116 hp → 151 hp. The other engines gain +13 hp and up; check the table for each one.
- +76 Nmfor diesels
Diesels gain mostly torque: +71 to +76 Nm for towing and hauling.
- up to +12%with the GAN GA+ on naturally aspirated engines
For 3 naturally aspirated engines: the GAN GA / GAN GA+ tuners; check the table for each engine’s numbers.
- 50 daystest drive
Enhanced performance or your money back, excluding shipping costs.
What Kia Cerato owners say about GAN
Very simple installation. A simple and comfortable mobile App. Real increase in power in Dynamic mode. And even in ECO mode, the car runs faster with less fuel consumption. After Gan installation, I immediately tried the Dynamic mode. I got everything what I needed, the response of the acceleration pedal became…
Kia Cerato I tuning FAQ
Which tuner do I need for my Kia Cerato I?
Turbo engines take the GAN GT or GAN GTL; naturally aspirated engines take the GAN GA or GAN GA+. Find your engine in the table above – each row shows the tuner and the price.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU flash tune without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.