Subaru
GAN tuning modules · up to +30% power

Performance Chip Tuning Subaru Legacy III (until 2004)

4 engines · +15 to +26 hp

Choose the engine for your Subaru Legacy III
  • up to +30%power with GAN GT
  • up to 15%fuel savings
  • up to 2 yearsengine warranty
  • 50 daystest drive
The short answer

Subaru Legacy III: 4 engines — 4 gas. Gains run from +15 to +26 hp, with up to +35 Nm more torque. GAN GA+ from 189 EUR.

4
engines
4 gas
+26hp
best in this generation: 3.0i 220 → 246 hp
gain range +15…+26 hp
+35Nm
max torque gain
3.0i, GA+
from 189EUR
tuning module price
GAN GA from 189 EUR · GAN GA+ from 189 EUR
Horsepower and torque gains

All Subaru Legacy III engines: exact gains

STOCK output, output with GAN, gain and price for each module.

EngineSTOCK → with GANGainTuners and prices
Gasoline · 4 engines
3.0i220 hp / 289 Nm
220 hp246 hp / 324 Nm
+26 hp+35 Nm
GA — 199 EUR · 246 hp
GA+ — 199 EUR · 246 hp
Select →
2.0i155 hp / 196 Nm
155 hp174 hp / 220 Nm
+19 hp+24 Nm
GA — 189 EUR · 174 hp
GA+ — 189 EUR · 174 hp
Select →
2.5i156 hp / 223 Nm
156 hp175 hp / 250 Nm
+19 hp+27 Nm
GA — 189 EUR · 175 hp
GA+ — 189 EUR · 175 hp
Select →
2.0i125 hp / 184 Nm
125 hp140 hp / 206 Nm
+15 hp+22 Nm
GA — 189 EUR · 140 hp
GA+ — 189 EUR · 140 hp
Select →
stock powergain with GAN

Each engine gets its own performance chip: GAN GT / GTL or GAN GA / GA+. Prices are per performance chip and include the current discount.

Not sure which engine you have?

The badge alone isn’t enough: in this generation, the same engine came with different horsepower ratings, each with its own calibration. Check the horsepower in your owner’s manual or vehicle documents and find the matching row.

Same badge, different factory power outputs in this generation:

2.0i 125 / 155 hp
GAN tuning module for the Subaru Legacy III

Subaru Legacy III tune: what changes

More power and torque with no ECU flash and no new parts – the module only adjusts the engine sensor signals. Your factory warranty is preserved: the ECU software is never changed, and the module can be removed at any time.

  • Bluetoothswitch modes from your phone
  • 18 mapsto fine-tune your engine
GAN GT tuning module
  • 15 minutesplug-and-play install
  • IP67water and dust protection
  • +26 hpbest in this generation

    3.0i 220 hp → 246 hp. The other engines gain +15 hp and up; check the table for each one.

  • up to +30%more power

    GAN GT: up to 30%, GAN GTL: up to 25%, GAN GA+: up to 12%.

  • GAN APPpower control via smartphone

    Switch between SPORT, DYNAMIC, ECO and STOCK in the GAN app.

  • 50 daystest drive

    Enhanced performance or your money back, excluding shipping costs.

Prices for the Subaru Legacy III
GAN GA / GA+ from 189 EUR
Find your engine in the table
FAQ

Subaru Legacy III tuning FAQ

Which tuner do I need for my Subaru Legacy III?

Every engine in this generation is naturally aspirated, so you’ll want the GAN GA or GAN GA+. Find your engine in the table above – each row shows the tuner and the price.

Is a tuning module the same as a Stage 1 tune?

Not quite. Stage 1 usually means an ECU flash tune without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.

2-year engine warranty
covers your engine, not just the performance chip
50-day test drive
no difference? Money back, excluding shipping costs
Control from your phone
SPORT / ECO / STOCK
Unplugs in about a minute
stock ECU software, no traces left
Ready for more power?

Pick your Subaru Legacy III engine

Pick your engine and see the horsepower gain