Performance Chip Tuning Chery B11
2 engines · +15 hp
Chery B11: 2 engines — 2 gas. Gains run from +15 to +15 hp, with up to +24 Nm more torque. GAN GA+ from 189 EUR.
All Chery B11 engines: exact gains
STOCK output, output with GAN, gain and price for each module.
| Engine | STOCK → with GAN | Gain | Tuners and prices | |
|---|---|---|---|---|
| Gasoline · 2 engines | ||||
| 2.0i123 hp / 168 Nm | +15 hp+20 Nm |
GA — 189 EUR · 138 hp GA+ — 189 EUR · 138 hp |
Select → | |
| 2.4i127 hp / 198 Nm | +15 hp+24 Nm |
GA — 189 EUR · 142 hp GA+ — 189 EUR · 142 hp |
Select → | |
Each engine gets its own performance chip: GAN GT / GTL or GAN GA / GA+. Prices are per performance chip and include the current discount.
Not sure which engine you have?
Find your engine by its horsepower – check your window sticker or decode your VIN. Each version has its own calibration.
Chery B11 tune: what changes
More power and torque with no ECU flash and no new parts – the module only adjusts the engine sensor signals. Your factory warranty is preserved: the ECU software is never changed, and the module can be removed at any time.
- Bluetoothswitch modes from your phone
- 18 mapsto fine-tune your engine

- 15 minutesplug-and-play install
- IP67water and dust protection
- +15 hpbest in this generation
2.0i 123 hp → 138 hp. The other engines gain +15 hp and up; check the table for each one.
- up to +30%more power
GAN GT: up to 30%, GAN GTL: up to 25%, GAN GA+: up to 12%.
- GAN APPpower control via smartphone
Switch between SPORT, DYNAMIC, ECO and STOCK in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding shipping costs.
Chery B11 tuning FAQ
Which tuner do I need for my Chery B11?
Every engine in this generation is naturally aspirated, so you’ll want the GAN GA or GAN GA+. Find your engine in the table above – each row shows the tuner and the price.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU flash tune without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.