Performance Chip Tuning JAC M1
Up to 12% more power for your JAC M1
The JAC M1: 1 generation and 1 engine in our catalog. For 1 naturally aspirated engine, go with the GAN GA or GAN GA+: the GAN GA+ adds +16 to +16 hp (GAN GA+ from 189 EUR).
Which JAC M1 do you have?
Start with the model year and generation. Then pick your engine by displacement and horsepower – you’ll find both in your owner’s manual or vehicle documents.
JAC M1 tuner: what GAN does and doesn’t do
More power and torque, with no ECU flash and no new parts. Your factory warranty is preserved: the ECU software is never changed, and the module can be removed at any time.
- Bluetoothswitch modes from your phone
- 18 mapsto fine-tune your engine

- 15 minutesplug-and-play install
- IP67water and dust protection
- +16 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated JAC M1 engines pick up +16 to +16 hp.
- up to +30%more power
GAN GT: up to 30%, GAN GTL: up to 25%, GAN GA+: up to 12%.
- GAN APPpower control via smartphone
Switch between SPORT, DYNAMIC, ECO and STOCK in the GAN app.
- 50 daystest drive
Enhanced performance or your money back, excluding shipping costs.
JAC M1 tuning FAQ
Does the GAN performance chip work on the JAC M1?
Yes, but how much power you gain depends on the engine – each version has its own calibration. The generation table lists stock output, output with GAN and the gain.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU flash tune without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.