Performance Chip Tuning Jeep Commander
6 engines · +26 to +60 hp
Jeep Commander: 6 engines — 5 gas and 1 diesel. Gains run from +26 to +60 hp, with up to +122 Nm more torque. GAN GTL from 249 EUR, GAN GT from 399 EUR. GAN GA+ from 199 EUR.
All Jeep Commander engines: exact gains
STOCK output, output with GAN, gain and price for each module. Diesel and gasoline engines are listed separately.
| Engine | STOCK → with GAN | Gain | Tuners and prices | |
|---|---|---|---|---|
| Diesel · 1 engine | ||||
| 3.0 CRD218 hp / 510 Nm | +60 hp+122 Nm |
GTL — 249 EUR · 269 hp GT — 399 EUR · 278 hp |
Select → | |
| Gasoline · 5 engines | ||||
| 4.7i231 hp / 410 Nm | +28 hp+49 Nm |
GA — 199 EUR · 259 hp GA+ — 199 EUR · 259 hp |
Select → | |
| 4.7i235 hp / 413 Nm | +28 hp+50 Nm |
GA — 199 EUR · 263 hp GA+ — 199 EUR · 263 hp |
Select → | |
| 5.7i334 hp / 509 Nm | +27 hp+41 Nm |
GA — 219 EUR · 361 hp GA+ — 219 EUR · 361 hp |
Select → | |
| 3.7i213 hp / 319 Nm | +26 hp+38 Nm |
GA — 199 EUR · 239 hp GA+ — 199 EUR · 239 hp |
Select → | |
| 5.7i326 hp / 500 Nm | +26 hp+40 Nm |
GA — 219 EUR · 352 hp GA+ — 219 EUR · 352 hp |
Select → | |
Each engine gets its own performance chip: GAN GT / GTL or GAN GA / GA+. Prices are per performance chip and include the current discount.
Not sure which engine you have?
The badge alone isn’t enough: in this generation, the same engine came with different horsepower ratings, each with its own calibration. Check the horsepower in your owner’s manual or vehicle documents and find the matching row.
Same badge, different factory power outputs in this generation:
Jeep Commander tune: what changes
The module plugs in between the sensors and the engine control unit (ECU) and adjusts their signals. It never rewrites your ECU software: your factory warranty is preserved, and the module can be removed at any time.
- Bluetoothswitch modes from your phone
- 18 mapsto fine-tune your engine

- 15 minutesplug-and-play install
- IP67water and dust protection
- +60 hpbest in this generation
3.0 CRD 218 hp → 278 hp. The other engines gain +26 hp and up; check the table for each one.
- +122 Nmfor diesels
Diesels gain mostly torque: +122 to +122 Nm for towing and hauling.
- up to +12%with the GAN GA+ on naturally aspirated engines
For 5 naturally aspirated engines: the GAN GA / GAN GA+ tuners; check the table for each engine’s numbers.
- 50 daystest drive
Enhanced performance or your money back, excluding shipping costs.
Jeep Commander tuning FAQ
Which tuner do I need for my Jeep Commander?
Turbo engines take the GAN GT or GAN GTL; naturally aspirated engines take the GAN GA or GAN GA+. Find your engine in the table above – each row shows the tuner and the price.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU flash tune without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.