Performance Chip Tuning Jeep Grand Cherokee IV (since 2010)
13 engines · +21 to +67 hp
Jeep Grand Cherokee IV: 13 engines — 8 gas and 5 diesel. Gains run from +21 to +67 hp, with up to +130 Nm more torque. GAN GTL from 249 EUR, GAN GT from 399 EUR. GAN GA+ from 189 EUR.
All Jeep Grand Cherokee IV engines: exact gains
STOCK output, output with GAN, gain and price for each module. Diesel and gasoline engines are listed separately.
| Engine | STOCK → with GAN | Gain | Tuners and prices | |
|---|---|---|---|---|
| Diesel · 5 engines | ||||
| 3.0 V6 CRD250 hp / 570 Nm | +67 hp+130 Nm |
GTL — 249 EUR · 307 hp GT — 399 EUR · 317 hp |
Select → | |
| 3.0 CRD241 hp / 550 Nm | +65 hp+111 Nm |
GTL — 249 EUR · 296 hp GT — 399 EUR · 306 hp |
Select → | |
| 3.0 V6 CRD (sensor1)190 hp / 440 Nm | +54 hp+111 Nm |
GTL — 249 EUR · 236 hp GT — 399 EUR · 244 hp |
Select → | |
| 3.0 V6 CRD (sensor2)190 hp / 440 Nm | +54 hp+111 Nm |
GTL — 249 EUR · 236 hp GT — 399 EUR · 244 hp |
Select → | |
| 3.0 CRD243 hp / 550 Nm | +41 hp+94 Nm |
GTL — 249 EUR · 277 hp GT — 399 EUR · 284 hp |
Select → | |
| Gasoline · 8 engines | ||||
| 6.4i475 hp / 630 Nm | +38 hp+50 Nm |
GA — 219 EUR · 513 hp GA+ — 219 EUR · 513 hp |
Select → | |
| 6.4i465 hp / 630 Nm | +37 hp+50 Nm |
GA — 219 EUR · 502 hp GA+ — 219 EUR · 502 hp |
Select → | |
| 3.0i238 hp / 295 Nm | +29 hp+35 Nm |
GA — 199 EUR · 267 hp GA+ — 199 EUR · 267 hp |
Select → | |
| 5.7i360 hp / 390 Nm | +29 hp+31 Nm |
GA — 219 EUR · 389 hp GA+ — 219 EUR · 389 hp |
Select → | |
| 5.7i352 hp / 520 Nm | +28 hp+42 Nm |
GA — 219 EUR · 380 hp GA+ — 219 EUR · 380 hp |
Select → | |
| 3.6i294 hp / 353 Nm | +24 hp+28 Nm |
GA — 199 EUR · 318 hp GA+ — 199 EUR · 318 hp |
Select → | |
| 3.6i286 hp / 347 Nm | +23 hp+28 Nm |
GA — 199 EUR · 309 hp GA+ — 199 EUR · 309 hp |
Select → | |
| 2.4i177 hp / 229 Nm | +21 hp+27 Nm |
GA — 189 EUR · 198 hp GA+ — 189 EUR · 198 hp |
Select → | |
Each engine gets its own performance chip: GAN GT / GTL or GAN GA / GA+. Prices are per performance chip and include the current discount.
Not sure which engine you have?
The badge alone isn’t enough: in this generation, the same engine came with different horsepower ratings, each with its own calibration. Check the horsepower in your owner’s manual or vehicle documents and find the matching row.
Same badge, different factory power outputs in this generation:
Jeep Grand Jeep Cherokee IV tune: what changes
The module plugs in between the sensors and the engine control unit (ECU) and adjusts their signals. It never rewrites your ECU software: your factory warranty is preserved, and the module can be removed at any time.
- Bluetoothswitch modes from your phone
- 18 mapsto fine-tune your engine
- 15 minutesplug-and-play install
- IP67water and dust protection
- +67 hpbest in this generation
3.0 V6 CRD 250 hp → 317 hp. The other engines gain +21 hp and up; check the table for each one.
- +130 Nmfor diesels
Diesels gain mostly torque: +94 to +130 Nm for towing and hauling.
- up to +12%with the GAN GA+ on naturally aspirated engines
For 8 naturally aspirated engines: the GAN GA / GAN GA+ tuners; check the table for each engine’s numbers.
- 50 daystest drive
Enhanced performance or your money back, excluding shipping costs.
What Jeep Grand Cherokee owners say about GAN
The installation took about 15 minutes, it really works, although I really did not believe in it. The car runs much softer in different modes and revs on the highway was lower than usual and I suppose the fuel consumption is also less, but at this moment I have no measurements. I am very glad with this purchase. I…
Jeep Grand Cherokee IV tuning FAQ
Which tuner do I need for my Jeep Grand Cherokee IV?
Turbo engines take the GAN GT or GAN GTL; naturally aspirated engines take the GAN GA or GAN GA+. Find your engine in the table above – each row shows the tuner and the price.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU flash tune without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.