Performance Chip Tuning Jeep Wrangler III (2007–2018)
6 engines · +23 to +56 hp
Jeep Wrangler III: 6 engines — 3 gas and 3 diesel. Gains run from +23 to +56 hp, with up to +114 Nm more torque. GAN GTL from 249 EUR, GAN GT from 399 EUR. GAN GA+ from 189 EUR.
All Jeep Wrangler III engines: exact gains
STOCK output, output with GAN, gain and price for each module. Diesel and gasoline engines are listed separately.
| Engine | STOCK → with GAN | Gain | Tuners and prices | |
|---|---|---|---|---|
| Diesel · 3 engines | ||||
| 2.8 CRD200 hp / 460 Nm | +56 hp+114 Nm |
GTL — 249 EUR · 248 hp GT — 399 EUR · 256 hp |
Select → | |
| 2.8 CRD177 hp / 410 Nm | +50 hp+107 Nm |
GTL — 249 EUR · 220 hp GT — 399 EUR · 227 hp |
Select → | |
| 2.8 CRD150 hp / 360 Nm | +43 hp+97 Nm |
GTL — 249 EUR · 187 hp GT — 399 EUR · 193 hp |
Select → | |
| Gasoline · 3 engines | ||||
| 3.8i199 hp / 315 Nm | +24 hp+38 Nm |
GA — 189 EUR · 223 hp GA+ — 189 EUR · 223 hp |
Select → | |
| 3.6i285 hp / 352 Nm | +23 hp+28 Nm |
GA — 199 EUR · 308 hp GA+ — 199 EUR · 308 hp |
Select → | |
| 3.6i Rubicon284 hp / 346 Nm | +23 hp+28 Nm |
GA — 199 EUR · 307 hp GA+ — 199 EUR · 307 hp |
Select → | |
Each engine gets its own performance chip: GAN GT / GTL or GAN GA / GA+. Prices are per performance chip and include the current discount.
Not sure which engine you have?
The badge alone isn’t enough: in this generation, the same engine came with different horsepower ratings, each with its own calibration. Check the horsepower in your owner’s manual or vehicle documents and find the matching row.
Same badge, different factory power outputs in this generation:
Jeep Wrangler III tune: what changes
The module plugs in between the sensors and the engine control unit (ECU) and adjusts their signals. It never rewrites your ECU software: your factory warranty is preserved, and the module can be removed at any time.
- Bluetoothswitch modes from your phone
- 18 mapsto fine-tune your engine
- 15 minutesplug-and-play install
- IP67water and dust protection
- +56 hpbest in this generation
2.8 CRD 200 hp → 256 hp. The other engines gain +23 hp and up; check the table for each one.
- +114 Nmfor diesels
Diesels gain mostly torque: +97 to +114 Nm for towing and hauling.
- up to +12%with the GAN GA+ on naturally aspirated engines
For 3 naturally aspirated engines: the GAN GA / GAN GA+ tuners; check the table for each engine’s numbers.
- 50 daystest drive
Enhanced performance or your money back, excluding shipping costs.
Jeep Wrangler III tuning FAQ
Which tuner do I need for my Jeep Wrangler III?
Turbo engines take the GAN GT or GAN GTL; naturally aspirated engines take the GAN GA or GAN GA+. Find your engine in the table above – each row shows the tuner and the price.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU flash tune without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.