Performance Chip Tuning Mazda 3 II (2009–2013)
11 engines · +12 to +52 hp
3 II: 11 engines — 7 gas and 4 diesel. Gains run from +12 to +52 hp, with up to +105 Nm more torque. GAN GTL from 219 EUR, GAN GT from 329 EUR. GAN GA+ from 189 EUR.
All 3 II engines: exact gains
STOCK output, output with GAN, gain and price for each module. Diesel and gasoline engines are listed separately.
| Engine | STOCK → with GAN | Gain | Tuners and prices | |
|---|---|---|---|---|
| Diesel · 4 engines | ||||
| 2.2 MZR-CD185 hp / 400 Nm | +52 hp+105 Nm |
GTL — 249 EUR · 229 hp GT — 399 EUR · 237 hp |
Select → | |
| 2.2 MZR-CD150 hp / 360 Nm | +43 hp+97 Nm |
GTL — 249 EUR · 187 hp GT — 399 EUR · 193 hp |
Select → | |
| 1.6 MZR-CD116 hp / 270 Nm | +35 hp+79 Nm |
GTL — 219 EUR · 146 hp GT — 329 EUR · 151 hp |
Select → | |
| 1.6 MZR-CD109 hp / 240 Nm | +33 hp+72 Nm |
GTL — 219 EUR · 137 hp GT — 329 EUR · 142 hp |
Select → | |
| Gasoline · 7 engines | ||||
| 2.3T260 hp / 380 Nm | +21 hp+30 Nm |
GA — 199 EUR · 281 hp GA+ — 199 EUR · 281 hp |
Select → | |
| 2.5i167 hp / 228 Nm | +20 hp+27 Nm |
GA — 189 EUR · 187 hp GA+ — 189 EUR · 187 hp |
Select → | |
| 2.0i155 hp / 148 Nm | +19 hp+18 Nm |
GA — 189 EUR · 174 hp GA+ — 189 EUR · 174 hp |
Select → | |
| 2.0i147 hp / 182 Nm | +18 hp+22 Nm |
GA — 189 EUR · 165 hp GA+ — 189 EUR · 165 hp |
Select → | |
| 2.0i150 hp / 186 Nm | +18 hp+22 Nm |
GA — 189 EUR · 168 hp GA+ — 189 EUR · 168 hp |
Select → | |
| 1.6i105 hp / 145 Nm | +13 hp+17 Nm |
GA — 189 EUR · 118 hp GA+ — 189 EUR · 118 hp |
Select → | |
| 1.6i103 hp / 145 Nm | +12 hp+17 Nm |
GA — 189 EUR · 115 hp GA+ — 189 EUR · 115 hp |
Select → | |
Each engine gets its own performance chip: GAN GT / GTL or GAN GA / GA+. Prices are per performance chip and include the current discount.
Not sure which engine you have?
The badge alone isn’t enough: in this generation, the same engine came with different horsepower ratings, each with its own calibration. Check the horsepower in your owner’s manual or vehicle documents and find the matching row.
Same badge, different factory power outputs in this generation:
Mazda 3 II tune: what changes
The module plugs in between the sensors and the engine control unit (ECU) and adjusts their signals. It never rewrites your ECU software: your factory warranty is preserved, and the module can be removed at any time.
- Bluetoothswitch modes from your phone
- 18 mapsto fine-tune your engine
- 15 minutesplug-and-play install
- IP67water and dust protection
- +52 hpbest in this generation
2.2 MZR-CD 185 hp → 237 hp. The other engines gain +12 hp and up; check the table for each one.
- +105 Nmfor diesels
Diesels gain mostly torque: +72 to +105 Nm for towing and hauling.
- up to +12%with the GAN GA+ on naturally aspirated engines
For 6 naturally aspirated engines: the GAN GA / GAN GA+ tuners; check the table for each engine’s numbers.
- 50 daystest drive
Enhanced performance or your money back, excluding shipping costs.
Mazda 3 II tuning FAQ
Which tuner do I need for my 3 II?
Find your engine in the table above – each row shows the tuner and the price.
Is a tuning module the same as a Stage 1 tune?
Not quite. Stage 1 usually means an ECU flash tune without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.